| SP50/8 Series | |||||||||||
 |  | ||||||||||
| Type Instruction | |||||||||||
| SP | 50 | / | 8 | － | 100 | BZ | － | 8-26 | F | G | 3 |
| Basis type | Main diameter 50mm | Axes diameter 8mm | Pulse count | Two-phase with a positive base point | Power voltage +8V~+30V | Output circuit form F: push-pull output | Out form G: Cable side out | Cable length 3m |
| Pulse / revolution (Note: the film code plate with vibration resist and inrush-resist, metal code wheel with high temperature resist and glass code wheel with high precision) | ||||||||||||
| 10 20 30 50 60 100 120 125 150 180 200 250 256 300 360 400 500 512 600 720 800 900 1000 1024 1200 1250 1500 1800 2000 2048 2400 2500 3000 3600 4000 4096 4500 4800 5000 |
| Output circuit | Drivers L | C,E,F | Drivers T | ||||||
| Mains voltage | +5V±5% | +5 货 or +8V~26V | +8V~26V | ||||||
| Current consumption | ≤60mA | ≤60mA | ≤60mA | ||||||
| Allowable load | 20mA | 30mA | 20mA | ||||||
| Signal high electrical level | ≥2.5V | ≥VCC*70%V | ≥VCC*70%V | ||||||
| Signal low electrical level | ≤0.5V | ≤0.5V | ≤0.5V | ||||||
| Rise/down time | ≤100ns | ≤1us | ≤100ns | ||||||
| Response frequency | 150KHz | 150KHz | 150KHz | ||||||
| Radial load | ≤40N | ||||
| Axial load | ≤30N | ||||
| Storque | ≤2 x 10ˉ³N.m | ||||
| Tiptop rotate speed | 6000r/min | ||||
| Runing inertia | 30g/cm² | ||||
| Allowable acceleration | 1 x 10⁴rad/s² | ||||
| weight | About0.1kg | ||||
| Concussion resist | 1000m/s²,6ms | ||
| Vibration resist | 100m/s², 10~200Hz | ||
| Working temperature | -20°C~+50°C | ||
| Storing temperature | -20°C~+80°C | ||
| Relatively humidity | ≤RH85% No icing | ||
| Protect grade | IP50 |
| OUTPUT CIRCUIT MODALITY |
 |
| OUTPUT WAVEFORM |
 |