| ZG3NE | |
| Medium power single phase AC output (rail mounted type) |  |
| ZG3NE Series Rail Mounted AC Output Solid State RelayZG3NE series integrated radiator (no need to calculate additional heatdissipation volume)The 22.5mm width conforms to the industrial installation design, reducingthe cabinet installation space for rail installation or screw lifting eyeinstallation. | |
| DIN Rail - Single channel AC output | |||||||||
| Load flows: 15, 20, 30 and 35 amps | Control voltage: 4-32VDC | Built-in RC snubber circuit and over-voltage protection | Zero-crossing or instantaneous conduction output | ||||||
| Load voltage: 24-280VC, 48-530VAC | Heavy industry SCR output | IP20 safe touch enclosure | LED input status indication | ||||||
| Model composition | |||||||||
| Product range ZG3NE | Load phase 1A | Load voltage 2 | Rated current 15 | Control voltage D | |||||
| Guide rail module | 1A: Single-phase AC output | 2: 24-280V Ac 5: 48-530V AC | 08:08 A 15:15 A 20:20 A | 25:25 A 30:30 A 35:35 A | D: 04-32VDC B: 03-15VDC EE: 90-230VAC | ||||
| Assembly Instructions | |
 | 1. Position the rail to align with the top portion of the DIN rail on the back of the SSR2. Using reasonable force, push the SSR in the direction of the arrow3. To remove, place the screwdriver on the clip and swing in the direction shownWarning: Improper method of removing the product from theDIN rail may damage the locking system |
| Assembly Instructions | |||
 | 1. When installing SSR, the center distance of the vertical holes can be adjusted +/-1.5 mm2. For proper cooling, the SSR requires air convection (such as an indoor fan).Air convection can effectively reduce SSR heat energy generated during work.When installing multiple SSR, keep the longitudinal spacing at 80mm and the lateral spacing at least 8mm.3. If air convection cannot be provided, please reduce the load current.4. Forced cooling (such as installing indoor fans and air inlets and outlets) can significantly improve thermal performance.5. The radiator temperature should not exceed 80°С тах....WARNING: Any contact with the SSR heat sink is strictly prohibited while working. | ||
| Terminals | |||
| output | IN | ||
 |  | ||
| Model: DBV5.5-14 / Material: CopperWiring range: 4-6mm²Implementation standard: GB/T14315-2008 | Model: DBV1.25-10 / Material: CopperWiring range: 0.5-2mm²Implementation standard: GBT14315-2008 | ||
 | Model: ZB6A GRMcomes with a blank marker | ||
| Derating curve | Wiring diagram | ||||
 |  | ||||
 | Attention:A well ventilated working environment can effectively imrpove the working efficiency and product life of the relay | ||||
| Attention | |||||
| The installation, operation, maintenance and care of electrical switches should be completed by qualified personnel. We will not bear any consequences if an accident occurs due to operational problems.SSR load-side short-circuit protection must use fast fuses or fast circuit breakers. Product damage caused by short circuits will not be covered by the warranty.It is strictly forbidden to use electric screwdrivers when wiring, as this may damage the internal structure of the relay.Warning: If the heat sink of the product is hot, be sure to let the product cool before touching it. Please follow the installation instructions. Improper operation may cause serious personal injury or permanent damage to the switch. |
| Warning | |||
| Risk of electric shock, explosion or arc flash when installing the product!Please cut off the power before using the product.Non-compliance can result in death, serious personal injury or damage to equipment.Do not allow liquids or foreign objects to enter this product. |
| Size / Material | ||||
 | The shell | DIN lifting eye | ||
| PBT-GF20-V0 Flame retardant grade | cm: nickel | |||
 | ||||
| Heat sink | ||||
| 6063A-T6 Treatment: hard anodic matte black | ||||
| Performance parameters | ||||||
| ZG3NE-1A 215D/220D/230D | ||||||
| output parameter | ||||||
| Working voltage(47-63HZ) | 24-280 | VAC | ||||
| Transient 4overvoltage | 800 | Vpk | ||||
| Maximum leakage current at off state | 0.25 | mAms | ||||
| Minimum when disconnected | 500 | Vμ | ||||
| Maximum load current | 08 | 15 | 20 | 30 | 35 | Arms |
| One cycle surge current | 170 | 245 | 400 | 725 | 725 | Apk |
| Conduct maximum pressure drop | 1.3 | Vp | ||||
| Maximum use of fusel2t | 128 | 340 | 880 | 2520 | 2520 | A2s |
| Substrate thermal resistance | 0.25 | 0.25 | 0.155 | 0.155 | 0.155 | ℃ W |
| controls parameter | ||||||
| Control voltage range | 4-32 | VDC | ||||
| Minimum off voltage | 1 | VDC | ||||
| Maximum input current | 2 | mA | ||||
| Minimum conduction current | 0.5 | mA | ||||
| Nominal input impedance | Current Regulated | |||||
| Maximum conduction time | 8.33 | ms | ||||
| Maximum break time | 8.33 | ms | ||||
| fundamental characteristics | ||||||
| work environment | -20 to 80 | ℃ | ||||
| Storage environment | -40 to 100 | ℃ | ||||
| Input to output insulation voltage | 4000 | Vrms | ||||
| Bottom insulation voltage | 2500 | Vrms | ||||
| Input to output maximum capacitance | 8 | pF | ||||
| Guide light color | green | |||||
| Product weight | 310 | g | ||||
| product packaging | L14.8*W13.4*T2.7 | cm | ||||
| Performance parameters | ||||||
| ZG3NE-1A 515D/520D/530D/535D | ||||||
| output parameter | ||||||
| Working voltage(47-63HZ) | 48-530 | VAC | ||||
| Transient 4overvoltage | 1600 | Vpk | ||||
| Maximum leakage current at off state | 0.25 | mAms | ||||
| Minimum when disconnected | 500 | Vμ | ||||
| Maximum load current | 15 | 20 | 30 | 35 | Arms | |
| One cycle surge current | 450 | 750 | 1050 | 1050 | Apk | |
| Conduct maximum pressure drop | 1.3 | Vp | ||||
| Maximum use of fusel2t | 880 | 2520 | 5500 | 5500 | A2s | |
| Substrate thermal resistance | 0.25 | 0.155 | 0.155 | 0.155 | ℃ W | |
| controls parameter | ||||||
| Control voltage range | 4-32 | VDC | ||||
| Minimum off voltage | 1 | VDC | ||||
| Maximum input current | 2 | mA | ||||
| Minimum conduction current | 0.8 | mA | ||||
| Nominal input impedance | Current Regulated | |||||
| Maximum conduction time | 8.33 | ms | ||||
| Maximum break time | 8.33 | ms | ||||
| fundamental characteristics | ||||||
| work environment | -20 to 80 | ℃ | ||||
| Storage environment | -40 to 100 | ℃ | ||||
| Input to output insulation voltage | 4000 | Vrms | ||||
| Bottom insulation voltage | 2500 | Vrms | ||||
| Input to output maximum capacitance | 8 | pF | ||||
| Guide light color | green | |||||
| Product weight | 310 | g | ||||
| product packaging | L14.8*W13.4*T2.7 | cm |
| WARNING | |
| 1.Warning: Use the incorrect method to remove the product from the DIN guide may damage the locking system 2. The installation, commissioning, maintenance and maintenance of electrical switches shall be completed by qualified engineers. Q&W will not bear any consequences for accidents caused by operational problems 3.Warning: Do not use an electric screwdriver when connecting cables. It may permanently damage the wiring terminals and SSR internal structure 4.SSR load end short circuit protection must use fast fuse, product damage caused by short circuit is not within the warranty scope 5. Do not allow liquids or foreign objects to enter this product |
| Model comparison table | ||||||||
| Q&W | Crydom | Celduc | Autonics | Carlo Gavazzi | Omron | Fotek | THE | i-Autoc |
| ZG3NE-1A215D | CKRD2410 | - | SRH1-1210-N | G3PJ-215B | SSR-K10DA | - | KVS240D10-LM | |
| SRH1-1215-N | G3PE-215B | |||||||
| ZG3NE-1A220D | CKRD2420 | SUL942440 | SRH1-1220-N | RJ1A23D20E | G3PE-225B | SSR-K20DA | - | KVS240D20-LM |
| DR2224D20U | SUL842070 | |||||||
| SAL942460 | ||||||||
| SAM943460 | ||||||||
| ZG3NE-1A230D | CKRD2430 | - | SRH1-1230-N | RJ1A23D30E | G3PJ-225B | SSR-K30DA | - | KVS240D30-LM |
| DR2224D30U | G3PE-235B | SSR-K40DA | ||||||
| ZG3NE-1A520D | CKRD4810 | SAL961360 | SRH1-1410-N | RGC1A60D20KKE | G3PJ-515B | SSR-K10DA-H | GTJ480-25A | KVS480D10-LM |
| CKRD4820 | SAL962360 | SRH1-1415-N | RJ1A60D20E | G3PE-515B | SSR-K20DA-H | GTJ600-25A | KVS480D20-LM | |
| CKRD6010 | SRH1-1420-N | RJ1A60D20U | KVS600D10-LM | |||||
| CKRD6020 | KVS600D20-LM | |||||||
| DR2260D20U | ||||||||
| ZG3NE-1A535D | CKRD4830 | SAL963460 | SRH1-1430-N | RJ1A60D30E | G3PJ-525B | SSR-K30DA-H | GTJ600-35A | KVS480D30-LM |
| CKRD6030 | SAL965460 | G3PE-525B | SSR-K40DA-H | GTJ600-40A-22 | KVS600D30-LM | |||
| DR2260D30U | SUL765070 | G3PE-535B | ||||||
| DR2260D35U | SUL865070 | |||||||
| SUL867070 | ||||||||
| SSR models and parameters may change at any time. The model comparison in the above table needs to be checked against each specification parameter to ensure its accuracy. | ||||||||